Negative binomial regression is for modeling count variables, usually for over-dispersed count outcome variables.

**Please note:** The purpose of this
page is to show how to use various data analysis commands. It does not cover
all aspects of the research process which researchers are expected to do. In
particular, it does not cover data cleaning and checking, verification of
assumptions, model diagnostics or potential follow-up analyses.

This page was updated using SPSS 19.

## Examples of negative binomial regression

Example 1. School administrators study the attendance behavior of high school juniors at two schools. Predictors of the number of days of absence include the type of program in which the student is enrolled and a standardized test in math.

Example 2. A health-related researcher is studying the number of hospital visits in past 12 months by senior citizens in a community based on the characteristics of the individuals and the types of health plans under which each one is covered.

## Description of the data

Let’s pursue Example 1 from above.

We have attendance data on 314 high school juniors from two urban high
schools in the file https://stats.idre.ucla.edu/wp-content/uploads/2016/02/nb_data.sav. The response
variable of interest is days absent, **daysabs**. The variable **math**
is the standardized math score for each student. The variable **prog** is a
three-level nominal variable indicating the type of instructional program in
which the student is enrolled.

Let’s look at the data. It is always a good idea to start with descriptive statistics and plots.

get file "https://stats.idre.ucla.edu/wp-content/uploads/2016/02/nb_data.sav". descriptives variables = daysabs math.graph /histogram daysabs.

Each variable has 314 valid observations and their distributions seem quite reasonable. The unconditional mean of our outcome variable is much lower than its variance.

Let’s continue with our description of the variables in this dataset. The table below shows the average numbers of days absent by program type and seems to suggest that program type is a good candidate for predicting the number of days absent, our outcome variable, because the mean value of the outcome appears to vary by
**prog**. The variances within each level of **prog** are higher than the
means within each level. These are the conditional means and variances. These
differences suggest that over-dispersion is present and that a Negative Binomial
model would be appropriate.

means tables=daysabs by prog /cells mean count var.

## Analysis methods you might consider

Below is a list of some analysis methods you may have encountered. Some of the methods listed are quite reasonable, while others have either fallen out of favor or have limitations.

- Negative binomial regression – Negative binomial regression can be used for over-dispersed count data, that is when the conditional variance exceeds the conditional mean. It can be considered as a generalization of Poisson regression since it has the same mean structure as Poisson regression and it has an extra parameter to model the over-dispersion. If the conditional distribution of the outcome variable is over-dispersed, the confidence intervals for the Negative binomial regression are likely to be narrower as compared to those from a Poisson regression model.
- Poisson regression – Poisson regression is often used for modeling count data. Poisson regression has a number of extensions useful for count models.
- Zero-inflated regression model – Zero-inflated models attempt to account for excess zeros. In other words, two kinds of zeros are thought to exist in the data, "true zeros" and "excess zeros". Zero-inflated models estimate two equations simultaneously, one for the count model and one for the excess zeros.
- OLS regression – Count outcome variables are sometimes log-transformed and analyzed using OLS regression. Many issues arise with this approach, including loss of data due to undefined values generated by taking the log of zero (which is undefined), as well as the lack of capacity to model the dispersion.

## Negative binomial regression analysis

Below we use the **genlin** command to estimate a negative binomial regression
model. We use the SPSS keyword **by** to indicate that the variable
that follows is a categorical predictor, and we use the SPSS keyword **with**
to indicate that the variable that follow is a continuous predictor. We
use the **(order = descending)** option to use the first level of the
variable **prog** as the reference group. On the **model**
subcommand, we again list the predictor variables. We also indicate that
the distribution to be used is **negbin** (negative binomial) and the link is
a log link. By default, SPSS will not estimate the dispersion parameter.
Because we wish for this to be estimated, we specified **(MLE)** after our
distribution.

SPSS provides many output tables, so we will interrupt the output to explain a few tables at a time.

genlin daysabs by prog (order = descending) with math /model prog math distribution = negbin(MLE) link=log.

In the first two tables above, we see that the probability distribution used was negative binomial, the link function was log, and that all 314 cases were used in the analysis. We then see information on the distribution of the categorical predictor variable, as well as information on the distribution of the dependent variable and the continuous predictor variable.

The table above provides several indices of the goodness of fit of the model. These measures can be used to compare models.

The tables above provide tests of the model as a whole (Omnibus Test). The likelihood ratio chi-square provides a test of the overall model comparing this model to a model without any predictors (a "null" model). We can see that our model is a significant improvement over such a model by looking at the p-value of this test.

In the Tests of Model Effects table, we see that each of the predictors
is statistically significant. The table includes the two degree of
freedom test of **prog**, which indicates that as a whole, the variable
**prog** is a significant predictor of **dayabs**.

The table Parameter Estimates contains the negative binomial
regression coefficients for each of the predictor variables along with their standard errors,
Wald chi-square values, p-values and 95% confidence intervals for the coefficients.
Both of the dummy variables for the variable
**prog** are statistically significant. Compared to level 1 of **
prog**, the expected log count for level 2 decreases by 0.44.
Compared to level 1 of **prog**, the expected log count of **3.prog**
decreases by 1.28. The variable **math** has a coefficient of -0.006, which
is statistically significant. This means that for each one-unit
increase on **math**, the expected log count of the number of days absent
decreases by 0.006 day.
Additionally, there is an estimate of the dispersion coefficient, **(Negative
binomial)**. A Poisson model is one in which this value is constrained to
zero. In this example, the parameter’s 95% confidence interval does not include
zero, suggesting that the negative binomial model form is more appropriate than
the Poisson. An estimate greater than zero suggests over-dispersion (variance
greater than mean). An estimate less than zero suggests under-dispersion, which
is very rare.

If you would like the results displayed as incident rate ratios, you can use the
**(exponentiated)** option on the print subcommand after **solution**.

genlin daysabs by prog (order = descending) with math /model prog math distribution = negbin(MLE) link=log /print solution (exponentiated).

Looking at the **Exp(B)** column in the table above indicates that the
incident rate for **prog**=2 is 0.64 times the incident rate for the
reference group (**prog**=1). Likewise, the incident rate for **prog**=3
is 0.28 times the incident rate for the reference group holding the other
variables constant. The percent change in the incident rate of **daysabs** is
a 1% decrease for every unit increase in **math**.

The form of the model equation for negative binomial regression is the same as that for Poisson regression. The log of the outcome is predicted with a linear combination of the predictors:

log(daysabs) = Intercept + b

_{1}(prog=2) + b_{2}(prog=3) + b_{3}math.

This implies:

daysabs = exp(Intercept + b

_{1}(prog=2) + b_{2}(prog=3)+ b_{3}math) = exp(Intercept) * exp(b_{1}(prog=2)) * exp(b_{2}(prog=3)) * exp(b_{3}math)

The coefficients have an *additive* effect in the log(y) scale and the
IRR have a *multiplicative* effect in the y scale. The overdispersion
parameter **alpha** in negative binomial regression does not effect the
expected counts, but it does effect the estimated variance of the expected
counts.

For additional information on the various metrics in which the results can be
presented, and the interpretation of such, please see *Regression Models for
Categorical Dependent Variables Using Stata, Second Edition* by J. Scott Long
and Jeremy Freese (2006).

For assistance in further understanding the model, we can use the **emmeans**
subcommand. Below we use the **emmeans** subcommand to calculate the predicted number of events at each level of
**prog**, holding all other variables (in this example, **math**) in the
model at their means.

genlin daysabs by prog (order = descending) with math /model prog math distribution = negbin(MLE) link=log /emmeans tables = prog scale = original.

In the output above, we see that the predicted number of events (e.g., days
absent) for level 1
of **prog** is about 10.24, holding **math** at its mean. The predicted
number of events for level 2 of **prog** is lower at 6.59, and the
predicted number of events for level 3 of **prog** is about 2.85.

Below we will obtain the predicted number of events while holding **math**
at 20, then 40.

genlin daysabs by prog (order = descending) with math /model prog math distribution = negbin(MLE) link=log /emmeans control = math (20) /emmeans control = math (40).<some output omitted>

The tables above show that with **prog** at its observed values and **math**
held at 20 for all observations, the average predicted count (or average number of
days absent) is about 6.84; when **math** = 40, the average predicted count is about
6.06. If we compare the predicted counts at any two levels of math, like math =
20 and math = 40, we can see that the ratio is (6.06/6.84) = 0.89. This matches
the IRR of 0.994 for a 20 unit change: 0.994^20 = 0.89.

You can graph the predicted number of events with the commands below. The graph indicates that the most awards are predicted for those in program type1, especially if the student has a high math score. The lowest number of predicted awards is for those students in program type 3.

genlin daysabs by prog (order = descending) with math /model prog math distribution = negbin(MLE) link=log /save meanpred (mean_values). GGRAPH /GRAPHDATASET NAME="graphdataset" VARIABLES=math mean_values prog /GRAPHSPEC SOURCE=INLINE. BEGIN GPL SOURCE: s=userSource(id("graphdataset")) DATA: math=col(source(s), name("math")) DATA: mean_values=col(source(s), name("mean_values")) DATA: prog=col(source(s), name("prog"), unit.category()) GUIDE: axis(dim(1), label("math score")) GUIDE: axis(dim(2), label("Predicted Value of Mean of Response"), delta(1)) GUIDE: legend(aesthetic(aesthetic.color.exterior), label("type of program")) SCALE: linear(dim(1), min(0), max(100)) SCALE: linear(dim(2), min(0), max(14)) SCALE: cat(aesthetic(aesthetic.color.exterior), include("1.00", "2.00", "3.00")) ELEMENT: point(position(math*mean_values), color.exterior(prog)) ELEMENT: line(position(math*mean_values), color(prog)) END GPL.

## Things to consider

- It is not recommended that negative binomial models be applied to small samples.
- Negative binomial models assume that only one process generates the data. If more than one process generates the data, then it is possible to have more 0s than expected by the negative binomial model; in this case, a zero-inflated model (either zero-inflated Poisson or zero-inflated negative binomial) may be more appropriate.
- One common cause of over-dispersion is excess zeros, which in turn are generated by an additional data generating process. In this situation, zero-inflated model should be considered.
- If the data generating process does not allow for any 0s (such as the number of days spent in the hospital), then a zero-truncated model may be more appropriate.
- Count data often have an exposure variable, which indicates the number
of times the event could have happened. This variable should be
incorporated into your negative binomial regression model with the use of the
**offset**option on the**model**subcommand. Note that the offset is the natural log of the exposure. - The outcome variable in a negative binomial regression cannot have negative numbers, and the exposure cannot have 0s.
- You will need to use the
**save**subcommand to obtain the residuals to check other assumptions of the negative binomial model (see Cameron and Trivedi (1998) and Dupont (2002) for more information).

## See also

## References

- Long, J. S. 1997.
*Regression Models for Categorical and Limited Dependent Variables.*Thousand Oaks, CA: Sage Publications. - Long, J. S. and Freese, J. 2006.
*Regression Models for Categorical Dependent Variables Using Stata, Second Edition*. College Station, TX: Stata Press. - Cameron, A. C. and Trivedi, P. K. 2009.
*Microeconometrics Using Stata*. College Station, TX: Stata Press. - Cameron, A. C. and Trivedi, P. K. 1998.
*Regression Analysis of Count Data*. New York: Cambridge Press. - Cameron, A. C. Advances in Count Data Regression Talk for the Applied Statistics Workshop, March 28, 2009. http://cameron.econ.ucdavis.edu/racd/count.html .
- Dupont, W. D. 2002.
*Statistical Modeling for Biomedical Researchers: A Simple Introduction to the Analysis of Complex Data.*New York: Cambridge Press.